Prerequisites for Network and Server Pentest (VAPT)

Information Required for Network/Server VAPT

To proceed with the Network VAPT, please provide us with the following information:

1. External and Internal IPs to Be Tested

A complete list of the external and internal IP addresses to be included in the test.

2. Devices and Configuration Details

A detailed list of devices in the network, including:

Device models
Operating Systems (OS) and firmware versions

3. VPN Setup for Internal Network Testing

For testing internal networks, we require VPN access. Please ensure that:

A secure VPN is set up.
Necessary credentials and access permissions are provided.

4. Firewall Whitelisting

If you are using a firewall, whitelist the following IP addresses to allow our testing team to conduct the audit without disruptions:

185.207.248.203
18.209.148.132
3.222.180.250
87.190.14.210

Additional Notes

Ensure that all provided information is accurate and up-to-date.
If there are any specific testing restrictions or requirements, please inform our team in advance.

You are not required to upload any details to the dashboard, as there is no separate section for updating the prerequisites. Instead, you can share the details with your respective Customer Success Manager (CSM) or email us at help@getastra.com.

If you have further questions or need assistance, feel free to contact our support team.

Updated on: 30/12/2024